|
5MBA
Advanced Melt Flow System
(Manual Basic Model)
5SA Advanced Melt Flow System
(Microprocessor Controlled Semi-automatic Model)
5MPCA
Advanced Melt Flow System
(Microprocessor Controlled Automatic Model)
Product Overview
Mid-range semi-automatic model. MFI is obtained by automatically measuring the volumetric flow rate and using the density at test temperature to convert to MFI. This procedure conforms to method B of the ASTM test standard.
Ray-Ran 5 Series Advanced Melt Flow Systems are completely modular in design and can be upgraded at any time.
Conforms to all International test standards for melt flow testing.
Standard Specification
The following features are supplied as standard and are included in the basic cost of the apparatus.
- Microprocessor controlled semi-automatic test procedure
- Single MFI test, density at test temperature
- 0-400 °C digital temperature measurement, control and display
- Variable distance piston travel measurement (0.01 mm resolution)
- Replaceable high carbon steel cylinder liner
- Standard test die
- Piston with brass guide including 0.325 kg test weight
- 2.160 kg test weight
- Polymer cut-off knife
- Die cleaning broach
- Cylinder charging tool
- Cylinder cleaning tool
- Die ejector tool
- Cylinder levelling device
- 50 yard roll cleaning swab material
- Graduated polymer filling shuttle
- Hexagonal key
- Easy access draw for tooling
- Easy to read liquid crystal display with sequence logic menus and auto prompt selection
- Ergonomically simple touch membrane keypad for data entry
- Yes / no mode selector
- Product user manual
- Fully traceable certificate of calibration
- CE declaration of conformity
- 1 year return to base manufacturer's warranty
Optional Melt Flow Test Weights
Optional melt flow test weights may be purchased with the apparatus or at a later date as required. 0.325 kg and 2.160 kg test weights are supplied as standard and are included in the basic cost of the apparatus. All optional melt flow test weights are available ex-stock direct from Ray-Ran.
Test weights are modular in design. Larger test weights include smaller test weights as shown.
2800-06-02
: 5 Series 1.000 kg Test Weight
2800-06-03
: 5 Series 1.050 kg Test Weight
2800-06-04
: 5 Series 1.200 kg Test Weight
2800-06-05
: 5 Series 2.160 kg Test Weight
2800-06-06
: 5 Series 3.800 kg Test Weight
2800-06-07
: 5 Series 5.000 kg Test Weight
2800-06-08
: 5 Series 10.000 kg Test Weight (includes 5.000 kg)
2800-06-08
: 5 Series 12.500 kg Test Weight (includes 5.000 kg)
2800-06-09
: 5 Series 21.600 kg Test Weight (includes 5.000 kg and 12.500 kg)
2800-06-00
: Complete set of 9 5 Series Test Weights
Please note that purchasing
a complete set of melt flow test weights represents a significant cost
saving.
Optional Melt Flow Spares And Ancillaries
Optional melt flow spares and ancillaries may be purchased together with the apparatus or at a later date as required. Melt flow cylinders, pistons and test dies are available in special Hastelloy corrosion resistant material. All optional melt flow spares and ancillaries are available ex-stock direct from Ray-Ran.
TEST DIES
200-06-01
: Standard Test Die
200-06-02
: Jet B Test Die with Small 1 mm Bore
200-06-03
: 1 inch Conical Mouth Test Die - ASTM D3364
200-06-04
: Hastelloy Standard Test Die
PISTONS
400-06-01
: Piston with Brass Guide inc. 0.325 kg Test Weight
400-06-01-01
: Hastelloy Piston with Brass Guide inc. 0.325 kg Test Weight
CYLINDERS
200-04-01-01
: Standard Steel Cylinder Liner
200-04-01-01
: Hastelloy Cylinder Liner
TOOLS
200-06-05
: Polymer Cut-off Knife
200-06-06
: Die Cleaning Broach
200-06-07
: Cylinder Charging Tool
200-06-08
: Cylinder Cleaning Tool
200-06-09
: Die Ejector Tool
200-06-12
: Cylinder Levelling Device
TEMPERATURE CONTROL
200-07-05
: PRT Sensor
200-07-03
: 240 volt Heater Band
200-07-02
: 110 volt Heater Band
ACCESSORIES
200-06-16
: 50 yard Roll Cleaning Swab Material
200-06-14
: Polymer Filling Shuttle
200-06-21
: Standard Test Die Go / No-go Plug Gauge
308-213
: Pack 3 Printer Ribbons
177-306
: Pack 10 Rolls Printer Paper
200-06-17
: Bottle Silicone Oil
|
